W-Series Wingstyle Hex-Nut Female Threaded Coupler

Attributes

Maximum Operating Pressure	2,500 PSI (172 bar)
Weight	3.15 lb
Break Quantity	1
Optional Package/Box Quantity	1
Material	Brass
Maximum OD	3.01" (76.5 mm)
Thread	Female NPTF
Seal	Nitrile Rubber
Body Size	1-1/2"
Temperature Range	-40°F to 250°F (-40°C to 121°C)
Burst Pressure	10,000 PSI (690 Bar)
Thread Size	1-1/2" - 11-1/2
Length	3.67" (93.2 mm)
Hex	2-7/64"
Flow	DELTA P=32 PSI 110 GPM

Details

Applications

Designed for applications requiring a coupling that can be connected under residual pressure with minimum spillage and air inclusion. Widely used on dump trailer wet-line hydraulic systems and oil field equipment. Not recommended for continuous hydraulic impulse applications.

Compatibility & Interchange Data

Aeroquip 5100-Series, Parker 6100-Series
Snap-Tite 78-Series, Faster Series-FB, Safeway S51-Series

Construction

Machined components are manufactured using solid bar stock
Stainless steel retaining rings and springs maximize corrosion resistance and extend service life.
Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Nitrile (Nitrile Rubber) seals are standard
Main coupler valve has a bonded face-seal to improve seal integrity during pressurized connection/disconnection.
Redundant O-Ring on the coupler body will engage nipple for secondary sealing support.

Safety Notes

Although wingstyle couplings are able to connect and disconnect while under pressure, it is recommended that hydraulic power supply be de-energized during connection to ensure operator safety. If it is not possible to de-energize the circuit, operators must be aware of their surroundings to ensure that an attachment or tool does not put them at risk, once hydraulic power is applied during the connection process.
W-series couplings are not recommended for continuous hydraulic impulse applications at rated pressures.

Resources