Ideally suited for applications where the media being transferred is under higher working pressures such as air, water, hydraulic and slurry
Image
![king safety whipsock](/sites/default/files/styles/product/public/product/images/king%20safety%20whipsock_ksw12_color_lg_watermarked.jpg?itok=moWNbASO)
Image
![air tank manifold with whipsock](/sites/default/files/styles/product/public/product/images/air%20tank%20manifold%20with%20whipsock%202_color_lg_watermarked_1.jpg?itok=pe5J695b)
Dixon Distributor?
Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.
Attributes
Maximum Operating Pressure | |
---|---|
Weight |
0.55 lb
|
Break Quantity |
0
|
Optional Package/Box Quantity |
0
|
Size |
3/4"
|
Material |
Galvanized Carbon Steel
|
Length |
25.20"
|
Range |
.7874" to 1.181"
|
Details
Application
Construction
- Wire rope: galvanized carbon steel
- Ferrules: aluminum
Features
- King safety whipsocks keep the hose under control in the event of a high-pressure hose assembly failure
- Dual anchor points secured beyond the fittings eliminate hose whip
- Galvanized steel woven stockings extend down the hose to grip securely over a larger area preventing whip, abrasion, and wear
- Securing both eye-to-rigid or eye-to-eye anchor points reduces whip in the event of a hose connection failure
Installation
High pressure hose restraint designed to secure hose-to-hose and hose-to-rigid anchor points to minimize uncontrolled movement in the event of hose connection failure or separation.
Note: For ease of installation, it's recommended to attach prior to installing the coupling assembly
- Select the appropriate King Safety Whipsock based on the hose O.D. and working pressure of the hose. For shorter assemblies a custom double ended, 4-eye Whipsock, must be used. Note: Only use custom Whipsocks on the specific length and diameter it is labeled for.
- Always inspect the entire King Safety Whipsock for frayed wire and corrosion before each use and installation. Replace immediately if damaged or worn.
- It is necessary that the hose is clean and free from oil and dirt before use.
- Compress the tail end of the King Safety Whipsock to open the ID, and work the stocking to slide the grip down the length of the hose. Run your hands down the grip from the coupling end to the tail to smooth out any gaps or loose wires in the grip to ensure contact with the hose.
- After coupling, slide the King Safety Whipsock up the hose into secured position just behind the fitting, ensuring the eyes have enough length to reach the anchoring points. Avoid overlapping the stockings if King Safety Whipsocks are on each end of the hose.
- Using a King Safety Shackle or bolt, nut and pin style clasp, rated above the breaking strength of the hose, secure the hose restraint at two horizontally opposed, rigid anchor points rated for the application.
- Slight slack in the legs is preferred. This will allow a travel distance for coupling in disconnection and greatly reduce the load applied to the hose restraint. A travel distance of up to 1" - 2" (40-50mm) is recommended.
Note
Contact Dixon with questions regarding working pressure, available options or custom configurations
Safety Notes
Be sure the anchoring points are rated for the application
WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Resources
Product Information
Product Video
Product Video
Image
![King Safety Whipsock with Shackles](/sites/default/files/styles/300x300/public/images/King-Safety-Whipsock-with-Shackles_2022-thumbnail.png?itok=9idXjWeq)
Product Literature
Image
![Outside Air Applications](/sites/default/files/styles/300x300/public/images/outside-air-applications-2024.png?itok=bYILPWbl)
Product Literature
Image
![Air King & Accessories](/sites/default/files/styles/300x300/public/images/Air%20King_GlobalAirKing2023_thumbnail.png?itok=JwHCXnHg)
Product Literature
Catalog Page