Case Studies

Imagen
traditional welded pipe manifold application
Case Study
Pump Cavitation Got You Down? One-Piece Suction Manifolds
 End-User Feedback
  • Sand dropout causes flow restrictions, and pump cavitation is common.
  • Traditional welded pipe manif
Imagen
2 piece repair nuts
Case Study
Why Use a Dixon 2-Piece Repair Nut Over a 1-Piece Nut?
Facts
  • The 2-piece nut costs 70% more than a 1-piece standard nut.
  • The 2-piece nut takes 1/4 of the time to install versus 1-piece nut.
  • Labor costs $90 to replac
Imagen
electric arc furnace
Case Study
Why Use a Dixon Ball-Joint Armored Hose for Water Supply & Return Lines on Electric Furnaces?
End-User Feedback

A mill’s acquisition price is only a portion of the total cost to remove and replace large-bore furnace hoses, and here are the related costs.

Imagen
one piece flange adapters
Case Study
Why Use Dixon 1-Piece Flange Adapters?
 End-User Feedback
  • A common challenge in maintaining equipment used in hydraulic fracturing operations is eliminating and preven
Imagen
frac site
Case Study
Why Use Dixon Triplex and Quintuplex Manifolds on HHP Hydraulic Fracturing Pumps?
 End-User Feedback
  • Well service company maintenance personnel state that carbon steel manifolds are working okay.
Imagen
multiple connections for transferring acid
Case Study
Why Use Dixon Vent-Lock Safety Cam & Groove?
End-User Feedback
  • Both safety and maintenance personnel at well service companies have requested cam & groove fittings that relieve remaining low pressure when lever arms are o